JTAG adapters based on the FT2232 full and high speed USB parts are popular low cost JTAG debug solutions. More...

Include dependency graph for ftdi.c:

Data Structures
struct	signal

struct	swd_cmd_queue_entry

Macros
#define	DO_CLOCK_DATA mpsse_clock_data

#define	DO_CLOCK_TMS_CS mpsse_clock_tms_cs

#define	DO_CLOCK_TMS_CS_OUT mpsse_clock_tms_cs_out

#define	JTAG_MODE (LSB_FIRST \| POS_EDGE_IN \| NEG_EDGE_OUT)

#define	JTAG_MODE_ALT (LSB_FIRST \| NEG_EDGE_IN \| NEG_EDGE_OUT)

#define	SWD_MODE (LSB_FIRST \| POS_EDGE_IN \| NEG_EDGE_OUT)

Functions
	COMMAND_HANDLER (ftdi_handle_channel_command)

	COMMAND_HANDLER (ftdi_handle_get_signal_command)

	COMMAND_HANDLER (ftdi_handle_layout_init_command)

	COMMAND_HANDLER (ftdi_handle_layout_signal_command)

	COMMAND_HANDLER (ftdi_handle_set_signal_command)

	COMMAND_HANDLER (ftdi_handle_tdo_sample_edge_command)

static int	create_default_signal (const char *name, uint16_t data_mask)

static struct signal *	create_signal (const char *name)

static int	create_signals (void)

static struct signal *	find_signal_by_name (const char *name)

static void	ftdi_end_state (enum tap_state state)

static void	ftdi_execute_command (struct jtag_command *cmd)

static void	ftdi_execute_pathmove (struct jtag_command *cmd)

static int	ftdi_execute_queue (struct jtag_command *cmd_queue)

static void	ftdi_execute_runtest (struct jtag_command *cmd)

static void	ftdi_execute_scan (struct jtag_command *cmd)

static void	ftdi_execute_sleep (struct jtag_command *cmd)

static void	ftdi_execute_stableclocks (struct jtag_command *cmd)

static void	ftdi_execute_statemove (struct jtag_command *cmd)

static void	ftdi_execute_tms (struct jtag_command *cmd)
	Clock a bunch of TMS (or SWDIO) transitions, to change the JTAG (or SWD) state machine. More...

static int	ftdi_get_signal (const struct signal s, uint16_t value_out)

static int	ftdi_initialize (void)

static int	ftdi_khz (int khz, int *jtag_speed)

static int	ftdi_quit (void)

static int	ftdi_reset (int trst, int srst)

static int	ftdi_set_signal (const struct signal *s, char value)

static int	ftdi_speed (int speed)

static int	ftdi_speed_div (int speed, int *khz)

static int	ftdi_swd_init (void)

static void	ftdi_swd_queue_cmd (uint8_t cmd, uint32_t *dst, uint32_t data, uint32_t ap_delay_clk)

static void	ftdi_swd_read_reg (uint8_t cmd, uint32_t *value, uint32_t ap_delay_clk)

static int	ftdi_swd_run_queue (void)
	Flush the MPSSE queue and process the SWD transaction queue. More...

static void	ftdi_swd_swdio_en (bool enable)

static int	ftdi_swd_switch_seq (enum swd_special_seq seq)

static void	ftdi_swd_write_reg (uint8_t cmd, uint32_t value, uint32_t ap_delay_clk)

static void	move_to_state (enum tap_state goal_state)
	Function move_to_state moves the TAP controller from the current state to a goal_state through a path given by tap_get_tms_path(). More...

Variables
static uint16_t	direction

static int	freq

struct adapter_driver	ftdi_adapter_driver

static uint8_t	ftdi_channel

static const struct command_registration	ftdi_command_handlers []

static struct jtag_interface	ftdi_interface

static uint8_t	ftdi_jtag_mode = JTAG_MODE

static const struct command_registration	ftdi_subcommand_handlers []

static const struct swd_driver	ftdi_swd

static uint16_t	jtag_direction_init

static uint16_t	jtag_output_init

static struct mpsse_ctx *	mpsse_ctx

static uint16_t	output

static int	queued_retval

static struct signal *	signals

static struct swd_cmd_queue_entry *	swd_cmd_queue

static size_t	swd_cmd_queue_alloced

static size_t	swd_cmd_queue_length

static bool	swd_mode

Detailed Description

JTAG adapters based on the FT2232 full and high speed USB parts are popular low cost JTAG debug solutions.

Many FT2232 based JTAG adapters are discrete, but development boards may integrate them as alternatives to more capable (and expensive) third party JTAG pods.

JTAG uses only one of the two communications channels ("MPSSE engines") on these devices. Adapters based on FT4232 parts have four ports/channels (A/B/C/D), instead of just two (A/B).

Especially on development boards integrating one of these chips (as opposed to discrete pods/dongles), the additional channels can be used for a variety of purposes, but OpenOCD only uses one channel at a time.

As a USB-to-serial adapter for the target's console UART ... which may be able to support ROM boot loaders that load initial firmware images to flash (or SRAM).
On systems which support ARM's SWD in addition to JTAG, or instead of it, that second port can be used for reading SWV/SWO trace data.
Additional JTAG links, e.g. to a CPLD or * FPGA.

FT2232 based JTAG adapters are "dumb" not "smart", because most JTAG request/response interactions involve round trips over the USB link. A "smart" JTAG adapter has intelligence close to the scan chain, so it can for example poll quickly for a status change (usually taking on the order of microseconds not milliseconds) before beginning a queued transaction which require the previous one to have completed.

There are dozens of adapters of this type, differing in details which this driver needs to understand. Those "layout" details are required as part of FT2232 driver configuration.

This code uses information contained in the MPSSE specification which was found here: https://www.ftdichip.com/Support/Documents/AppNotes/AN2232C-01_MPSSE_Cmnd.pdf Hereafter this is called the "MPSSE Spec".

The datasheet for the ftdichip.com's FT2232H part is here: https://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT2232H.pdf

Also note the issue with code 0x4b (clock data to TMS) noted in http://developer.intra2net.com/mailarchive/html/libftdi/2009/msg00292.html which can affect longer JTAG state paths.

Definition in file ftdi.c.

Macro Definition Documentation

◆ DO_CLOCK_DATA

#define DO_CLOCK_DATA mpsse_clock_data

Definition at line 83 of file ftdi.c.

◆ DO_CLOCK_TMS_CS

#define DO_CLOCK_TMS_CS mpsse_clock_tms_cs

Definition at line 84 of file ftdi.c.

◆ DO_CLOCK_TMS_CS_OUT

#define DO_CLOCK_TMS_CS_OUT mpsse_clock_tms_cs_out

Definition at line 85 of file ftdi.c.

◆ JTAG_MODE

#define JTAG_MODE (LSB_FIRST | POS_EDGE_IN | NEG_EDGE_OUT)

Definition at line 88 of file ftdi.c.

◆ JTAG_MODE_ALT

#define JTAG_MODE_ALT (LSB_FIRST | NEG_EDGE_IN | NEG_EDGE_OUT)

Definition at line 89 of file ftdi.c.

◆ SWD_MODE

#define SWD_MODE (LSB_FIRST | POS_EDGE_IN | NEG_EDGE_OUT)

Definition at line 90 of file ftdi.c.

Function Documentation

◆ COMMAND_HANDLER() [1/6]

COMMAND_HANDLER ( ftdi_handle_channel_command )

Definition at line 1078 of file ftdi.c.

References CMD_ARGC, CMD_ARGV, COMMAND_PARSE_NUMBER, ERROR_COMMAND_SYNTAX_ERROR, ERROR_OK, and ftdi_channel.

◆ COMMAND_HANDLER() [2/6]

COMMAND_HANDLER ( ftdi_handle_get_signal_command )

Definition at line 1202 of file ftdi.c.

References CMD, CMD_ARGC, CMD_ARGV, command_print(), ERROR_COMMAND_SYNTAX_ERROR, ERROR_FAIL, ERROR_OK, find_signal_by_name(), and ftdi_get_signal().

◆ COMMAND_HANDLER() [3/6]

COMMAND_HANDLER ( ftdi_handle_layout_init_command )

Definition at line 1088 of file ftdi.c.

References CMD_ARGC, CMD_ARGV, COMMAND_PARSE_NUMBER, ERROR_COMMAND_SYNTAX_ERROR, ERROR_OK, jtag_direction_init, and jtag_output_init.

◆ COMMAND_HANDLER() [4/6]

COMMAND_HANDLER ( ftdi_handle_layout_signal_command )

Definition at line 1099 of file ftdi.c.

References CMD_ARGC, CMD_ARGV, COMMAND_PARSE_NUMBER, create_signal(), signal::data_mask, ERROR_COMMAND_SYNTAX_ERROR, ERROR_FAIL, ERROR_OK, find_signal_by_name(), signal::input_mask, signal::invert_data, signal::invert_input, signal::invert_oe, LOG_ERROR, and signal::oe_mask.

◆ COMMAND_HANDLER() [5/6]

COMMAND_HANDLER ( ftdi_handle_set_signal_command )

Definition at line 1171 of file ftdi.c.

References CMD_ARGC, CMD_ARGV, ERROR_COMMAND_ARGUMENT_INVALID, ERROR_COMMAND_SYNTAX_ERROR, ERROR_FAIL, find_signal_by_name(), ftdi_set_signal(), LOG_ERROR, and mpsse_flush().

◆ COMMAND_HANDLER() [6/6]

COMMAND_HANDLER ( ftdi_handle_tdo_sample_edge_command )

Definition at line 1224 of file ftdi.c.

References CMD, CMD_ARGC, CMD_ARGV, command_print(), ERROR_COMMAND_SYNTAX_ERROR, ERROR_OK, ftdi_jtag_mode, JTAG_MODE, JTAG_MODE_ALT, nvp::name, NULL, nvp_name2value(), nvp_value2name(), and nvp::value.

◆ create_default_signal()

static int create_default_signal	(	const char *	name,
		uint16_t	data_mask
	)

static

Definition at line 1350 of file ftdi.c.

References create_signal(), signal::data_mask, ERROR_FAIL, ERROR_OK, signal::invert_data, signal::invert_oe, LOG_ERROR, name, and signal::oe_mask.

Referenced by create_signals().

◆ create_signal()

static struct signal* create_signal ( const char * name )

static

Definition at line 172 of file ftdi.c.

References name, signal::next, NULL, and signals.

Referenced by COMMAND_HANDLER(), and create_default_signal().

◆ create_signals()

static int create_signals ( void )

static

Definition at line 1365 of file ftdi.c.

References create_default_signal(), ERROR_FAIL, and ERROR_OK.

Referenced by ftdi_swd_init().

◆ find_signal_by_name()

static struct signal* find_signal_by_name ( const char * name )

static

Definition at line 163 of file ftdi.c.

References name, signal::next, NULL, and signals.

Referenced by COMMAND_HANDLER(), ftdi_execute_queue(), ftdi_initialize(), ftdi_reset(), ftdi_swd_run_queue(), and ftdi_swd_swdio_en().

◆ ftdi_end_state()

static void ftdi_end_state ( enum tap_state state )

static

Definition at line 368 of file ftdi.c.

References LOG_ERROR, state, tap_is_state_stable(), tap_set_end_state(), and tap_state_name().

Referenced by ftdi_execute_runtest(), ftdi_execute_scan(), and ftdi_execute_statemove().

◆ ftdi_execute_command()

static void ftdi_execute_command ( struct jtag_command * cmd )

static

Definition at line 663 of file ftdi.c.

References cmd, ftdi_execute_pathmove(), ftdi_execute_runtest(), ftdi_execute_scan(), ftdi_execute_sleep(), ftdi_execute_stableclocks(), ftdi_execute_statemove(), ftdi_execute_tms(), JTAG_PATHMOVE, JTAG_RESET, JTAG_RUNTEST, JTAG_SCAN, JTAG_SLEEP, JTAG_STABLECLOCKS, JTAG_TLR_RESET, JTAG_TMS, and LOG_ERROR.

Referenced by ftdi_execute_queue().

◆ ftdi_execute_pathmove()

static void ftdi_execute_pathmove ( struct jtag_command * cmd )

static

Definition at line 437 of file ftdi.c.

References buf_set_u32(), cmd, DO_CLOCK_TMS_CS_OUT, ftdi_jtag_mode, LOG_DEBUG_IO, LOG_ERROR, tap_get_state(), tap_set_end_state(), tap_set_state, tap_state_name(), and tap_state_transition().

Referenced by ftdi_execute_command().

◆ ftdi_execute_queue()

static int ftdi_execute_queue ( struct jtag_command * cmd_queue )

static

Definition at line 702 of file ftdi.c.

References cmd, ERROR_OK, find_signal_by_name(), ftdi_execute_command(), ftdi_set_signal(), LOG_ERROR, and mpsse_flush().

◆ ftdi_execute_runtest()

static void ftdi_execute_runtest ( struct jtag_command * cmd )

static

Definition at line 378 of file ftdi.c.

References cmd, DO_CLOCK_TMS_CS_OUT, ftdi_end_state(), ftdi_jtag_mode, LOG_DEBUG_IO, move_to_state(), tap_get_end_state(), tap_get_state(), TAP_IDLE, tap_state_name(), and zero.

Referenced by ftdi_execute_command().

◆ ftdi_execute_scan()

static void ftdi_execute_scan ( struct jtag_command * cmd )

static

Definition at line 488 of file ftdi.c.

References bit_copy(), cmd, DO_CLOCK_DATA, DO_CLOCK_TMS_CS, DO_CLOCK_TMS_CS_OUT, ftdi_end_state(), ftdi_jtag_mode, scan_field::in_value, jtag_scan_type(), LOG_DEBUG_IO, move_to_state(), scan_field::num_bits, scan_field::out_value, TAP_DRSHIFT, tap_get_end_state(), tap_get_state(), TAP_IDLE, TAP_IRSHIFT, tap_set_state, tap_state_name(), and tap_state_transition().

Referenced by ftdi_execute_command().

◆ ftdi_execute_sleep()

static void ftdi_execute_sleep ( struct jtag_command * cmd )

static

Definition at line 628 of file ftdi.c.

References cmd, jtag_sleep(), LOG_DEBUG_IO, mpsse_flush(), tap_get_state(), and tap_state_name().

Referenced by ftdi_execute_command().

◆ ftdi_execute_stableclocks()

static void ftdi_execute_stableclocks ( struct jtag_command * cmd )

static

Definition at line 639 of file ftdi.c.

References cmd, DO_CLOCK_TMS_CS_OUT, ftdi_jtag_mode, LOG_DEBUG_IO, tap_get_state(), TAP_RESET, and tap_state_name().

Referenced by ftdi_execute_command().

◆ ftdi_execute_statemove()

static void ftdi_execute_statemove ( struct jtag_command * cmd )

static

Definition at line 408 of file ftdi.c.

References cmd, ftdi_end_state(), LOG_DEBUG_IO, move_to_state(), tap_get_end_state(), tap_get_state(), TAP_RESET, and tap_state_name().

Referenced by ftdi_execute_command().

◆ ftdi_execute_tms()

static void ftdi_execute_tms ( struct jtag_command * cmd )

static

Clock a bunch of TMS (or SWDIO) transitions, to change the JTAG (or SWD) state machine.

REVISIT: Not the best method, perhaps.

Definition at line 424 of file ftdi.c.

References cmd, DO_CLOCK_TMS_CS_OUT, ftdi_jtag_mode, and LOG_DEBUG_IO.

Referenced by ftdi_execute_command().

◆ ftdi_get_signal()

static int ftdi_get_signal	(	const struct signal *	s,
		uint16_t *	value_out
	)

static

Definition at line 243 of file ftdi.c.

References ERROR_FAIL, ERROR_OK, signal::input_mask, signal::invert_input, LOG_ERROR, mpsse_flush(), mpsse_read_data_bits_high_byte(), mpsse_read_data_bits_low_byte(), and signal::name.

Referenced by COMMAND_HANDLER().

◆ ftdi_initialize()

static int ftdi_initialize ( void )

static

◆ ftdi_khz()

static int ftdi_khz	(	int	khz,
		int *	jtag_speed
	)

static

Definition at line 357 of file ftdi.c.

References ERROR_FAIL, ERROR_OK, LOG_DEBUG, and mpsse_is_high_speed().

◆ ftdi_quit()

static int ftdi_quit ( void )

static

Definition at line 781 of file ftdi.c.

References ERROR_OK, mpsse_close(), signal::name, signal::next, signals, and swd_cmd_queue.

◆ ftdi_reset()

static int ftdi_reset	(	int	trst,
		int	srst
	)

static

Definition at line 590 of file ftdi.c.

References find_signal_by_name(), ftdi_set_signal(), jtag_get_reset_config(), LOG_DEBUG_IO, LOG_ERROR, mpsse_flush(), RESET_HAS_SRST, RESET_HAS_TRST, RESET_SRST_PUSH_PULL, RESET_TRST_OPEN_DRAIN, and swd_mode.

◆ ftdi_set_signal()

static int ftdi_set_signal	(	const struct signal *	s,
		char	value
	)

static

Definition at line 190 of file ftdi.c.

References signal::data_mask, direction, ERROR_FAIL, ERROR_OK, signal::invert_data, signal::invert_oe, LOG_ERROR, mpsse_set_data_bits_high_byte(), mpsse_set_data_bits_low_byte(), signal::name, signal::oe_mask, and output.

Referenced by COMMAND_HANDLER(), ftdi_execute_queue(), ftdi_initialize(), ftdi_reset(), ftdi_swd_run_queue(), and ftdi_swd_swdio_en().

◆ ftdi_speed()

static int ftdi_speed ( int speed )

static

Definition at line 335 of file ftdi.c.

References ERROR_OK, ftdi_jtag_mode, JTAG_MODE_ALT, LOG_ERROR, LOG_INFO, mpsse_set_frequency(), and swd_mode.

◆ ftdi_speed_div()

static int ftdi_speed_div	(	int	speed,
		int *	khz
	)

static

Definition at line 351 of file ftdi.c.

References ERROR_OK.

◆ ftdi_swd_init()

static int ftdi_swd_init ( void )

static

Definition at line 1378 of file ftdi.c.

References create_signals(), ERROR_FAIL, ERROR_OK, LOG_INFO, swd_cmd_queue, swd_cmd_queue_alloced, and swd_mode.

◆ ftdi_swd_queue_cmd()

static void ftdi_swd_queue_cmd	(	uint8_t	cmd,
		uint32_t *	dst,
		uint32_t	data,
		uint32_t	ap_delay_clk
	)

static

Definition at line 1486 of file ftdi.c.

References buf_set_u32(), swd_cmd_queue_entry::cmd, cmd, swd_cmd_queue_entry::dst, ERROR_OK, ftdi_swd_run_queue(), ftdi_swd_swdio_en(), LOG_DEBUG, mpsse_clock_data_in(), mpsse_clock_data_out(), NULL, parity_u32(), queued_retval, SWD_CMD_APNDP, SWD_CMD_PARK, swd_cmd_queue, swd_cmd_queue_alloced, swd_cmd_queue_length, SWD_CMD_RNW, SWD_CMD_START, SWD_MODE, and swd_cmd_queue_entry::trn_ack_data_parity_trn.

Referenced by ftdi_swd_read_reg(), and ftdi_swd_write_reg().

◆ ftdi_swd_read_reg()

static void ftdi_swd_read_reg	(	uint8_t	cmd,
		uint32_t *	value,
		uint32_t	ap_delay_clk
	)

static

Definition at line 1539 of file ftdi.c.

References cmd, ftdi_swd_queue_cmd(), and SWD_CMD_RNW.

◆ ftdi_swd_run_queue()

static int ftdi_swd_run_queue ( void )

static

Flush the MPSSE queue and process the SWD transaction queue.

Returns

Definition at line 1414 of file ftdi.c.

References buf_get_u32(), cmd, swd_cmd_queue_entry::dst, ERROR_FAIL, ERROR_OK, find_signal_by_name(), ftdi_set_signal(), LOG_CUSTOM_LEVEL, LOG_DEBUG_IO, LOG_ERROR, LOG_LVL_DEBUG, LOG_LVL_DEBUG_IO, mpsse_clock_data_out(), mpsse_flush(), NULL, parity(), parity_u32(), queued_retval, SWD_ACK_FAULT, SWD_ACK_OK, swd_ack_to_error_code(), SWD_ACK_WAIT, SWD_CMD_A32, SWD_CMD_APNDP, swd_cmd_queue, swd_cmd_queue_length, swd_cmd_returns_ack(), SWD_CMD_RNW, and SWD_MODE.

Referenced by ftdi_swd_queue_cmd().

◆ ftdi_swd_swdio_en()

static void ftdi_swd_swdio_en ( bool enable )

static

Definition at line 1392 of file ftdi.c.

References signal::data_mask, direction, find_signal_by_name(), ftdi_set_signal(), jtag_direction_init, mpsse_set_data_bits_low_byte(), and output.

Referenced by ftdi_swd_queue_cmd().

◆ ftdi_swd_switch_seq()

static int ftdi_swd_switch_seq ( enum swd_special_seq seq )

static

Definition at line 1551 of file ftdi.c.

◆ ftdi_swd_write_reg()

static void ftdi_swd_write_reg	(	uint8_t	cmd,
		uint32_t	value,
		uint32_t	ap_delay_clk
	)

static

Definition at line 1545 of file ftdi.c.

References cmd, ftdi_swd_queue_cmd(), NULL, and SWD_CMD_RNW.

◆ move_to_state()

static void move_to_state ( enum tap_state goal_state )

static

Function move_to_state moves the TAP controller from the current state to a goal_state through a path given by tap_get_tms_path().

State transition logging is performed by delegation to clock_tms().

Parameters

goal_state is the destination state for the move.

Definition at line 307 of file ftdi.c.

References DO_CLOCK_TMS_CS_OUT, ftdi_jtag_mode, LOG_DEBUG_IO, tap_get_state(), tap_get_tms_path(), tap_get_tms_path_len(), tap_set_state, tap_state_name(), and tap_state_transition().

Referenced by ftdi_execute_runtest(), ftdi_execute_scan(), and ftdi_execute_statemove().

Variable Documentation

◆ direction

◆ freq

int freq

static

Definition at line 154 of file ftdi.c.

Referenced by FLASH_BANK_COMMAND_HANDLER(), and ftdi_initialize().

◆ ftdi_adapter_driver

struct adapter_driver ftdi_adapter_driver

Initial value:

= {
    .name = "ftdi",
    .transport_ids = TRANSPORT_JTAG | TRANSPORT_SWD,
    .transport_preferred_id = TRANSPORT_JTAG,
    .commands = ftdi_command_handlers,
 
    .init = ftdi_initialize,
    .quit = ftdi_quit,
    .reset = ftdi_reset,
    .speed = ftdi_speed,
    .khz = ftdi_khz,
    .speed_div = ftdi_speed_div,
 
    .jtag_ops = &ftdi_interface,
    .swd_ops = &ftdi_swd,
}

Definition at line 1551 of file ftdi.c.

◆ ftdi_channel

uint8_t ftdi_channel

static

Definition at line 92 of file ftdi.c.

Referenced by COMMAND_HANDLER(), and ftdi_initialize().

◆ ftdi_command_handlers

const struct command_registration ftdi_command_handlers[]

static

Initial value:

= {
    {
        .name = "ftdi",
        .mode = COMMAND_ANY,
        .help = "perform ftdi management",
        .chain = ftdi_subcommand_handlers,
        .usage = "",
    },
    COMMAND_REGISTRATION_DONE
}

Definition at line 1224 of file ftdi.c.

◆ ftdi_interface

struct jtag_interface ftdi_interface

static

Initial value:

= {
    .supported = DEBUG_CAP_TMS_SEQ,
    .execute_queue = ftdi_execute_queue,
}

Definition at line 1551 of file ftdi.c.

◆ ftdi_jtag_mode

uint8_t ftdi_jtag_mode = JTAG_MODE

static

Definition at line 93 of file ftdi.c.

Referenced by COMMAND_HANDLER(), ftdi_execute_pathmove(), ftdi_execute_runtest(), ftdi_execute_scan(), ftdi_execute_stableclocks(), ftdi_execute_tms(), ftdi_speed(), and move_to_state().

◆ ftdi_subcommand_handlers

const struct command_registration ftdi_subcommand_handlers[]

static

Definition at line 1224 of file ftdi.c.

◆ ftdi_swd

const struct swd_driver ftdi_swd

static

Initial value:

= {
    .init = ftdi_swd_init,
    .switch_seq = ftdi_swd_switch_seq,
    .read_reg = ftdi_swd_read_reg,
    .write_reg = ftdi_swd_write_reg,
    .run = ftdi_swd_run_queue,
}

Definition at line 1551 of file ftdi.c.

◆ jtag_direction_init

uint16_t jtag_direction_init

static

Definition at line 159 of file ftdi.c.

Referenced by COMMAND_HANDLER(), ftdi_initialize(), and ftdi_swd_swdio_en().

◆ jtag_output_init

uint16_t jtag_output_init

static

Definition at line 158 of file ftdi.c.

Referenced by COMMAND_HANDLER(), and ftdi_initialize().

◆ mpsse_ctx

struct mpsse_ctx* mpsse_ctx

static

Definition at line 130 of file ftdi.c.

◆ output

uint16_t output

static

Definition at line 156 of file ftdi.c.

Referenced by COMMAND_HANDLER(), command_vprint(), ftdi_initialize(), ftdi_set_signal(), ftdi_swd_swdio_en(), handle_iod_output(), parport_write_data(), and target_handle_md_output().

◆ queued_retval

int queued_retval

static

Definition at line 153 of file ftdi.c.

Referenced by ftdi_swd_queue_cmd(), and ftdi_swd_run_queue().

◆ signals

struct signal* signals

static

Definition at line 143 of file ftdi.c.

Referenced by create_signal(), find_signal_by_name(), and ftdi_quit().

◆ swd_cmd_queue

struct swd_cmd_queue_entry * swd_cmd_queue

static

Referenced by ftdi_quit(), ftdi_swd_init(), ftdi_swd_queue_cmd(), and ftdi_swd_run_queue().

◆ swd_cmd_queue_alloced

size_t swd_cmd_queue_alloced

static

Definition at line 152 of file ftdi.c.

Referenced by ftdi_swd_init(), and ftdi_swd_queue_cmd().

◆ swd_cmd_queue_length

size_t swd_cmd_queue_length

static

Definition at line 151 of file ftdi.c.

Referenced by ftdi_swd_queue_cmd(), and ftdi_swd_run_queue().

◆ swd_mode

bool swd_mode

static

Definition at line 95 of file ftdi.c.

Referenced by ftdi_initialize(), ftdi_reset(), ftdi_speed(), and ftdi_swd_init().

Data Structures

Macros

Functions

Variables

Detailed Description

Macro Definition Documentation

◆ DO_CLOCK_DATA

◆ DO_CLOCK_TMS_CS

◆ DO_CLOCK_TMS_CS_OUT

◆ JTAG_MODE

◆ JTAG_MODE_ALT

◆ SWD_MODE

Function Documentation

◆ COMMAND_HANDLER() [1/6]

◆ COMMAND_HANDLER() [2/6]

◆ COMMAND_HANDLER() [3/6]

◆ COMMAND_HANDLER() [4/6]

◆ COMMAND_HANDLER() [5/6]

◆ COMMAND_HANDLER() [6/6]

◆ create_default_signal()

◆ create_signal()

◆ create_signals()

◆ find_signal_by_name()

◆ ftdi_end_state()

◆ ftdi_execute_command()

◆ ftdi_execute_pathmove()

◆ ftdi_execute_queue()

◆ ftdi_execute_runtest()

◆ ftdi_execute_scan()

◆ ftdi_execute_sleep()

◆ ftdi_execute_stableclocks()

◆ ftdi_execute_statemove()

◆ ftdi_execute_tms()

◆ ftdi_get_signal()

◆ ftdi_initialize()

◆ ftdi_khz()

◆ ftdi_quit()

◆ ftdi_reset()

◆ ftdi_set_signal()

◆ ftdi_speed()

◆ ftdi_speed_div()

◆ ftdi_swd_init()

◆ ftdi_swd_queue_cmd()

◆ ftdi_swd_read_reg()

◆ ftdi_swd_run_queue()

◆ ftdi_swd_swdio_en()

◆ ftdi_swd_switch_seq()

◆ ftdi_swd_write_reg()

◆ move_to_state()

Variable Documentation

◆ direction

◆ freq

◆ ftdi_adapter_driver

◆ ftdi_channel

◆ ftdi_command_handlers

◆ ftdi_interface

◆ ftdi_jtag_mode

◆ ftdi_subcommand_handlers

◆ ftdi_swd

◆ jtag_direction_init

◆ jtag_output_init

◆ mpsse_ctx

◆ output

◆ queued_retval

◆ signals

◆ swd_cmd_queue

◆ swd_cmd_queue_alloced

◆ swd_cmd_queue_length

◆ swd_mode