73 #define FCF_ADDRESS 0x00000400
77 #define FCF_FDPROT 0xf
80 #define FLEXRAM 0x14000000
82 #define MSCM_OCMDR0 0x40001400
83 #define MSCM_OCMDR1 0x40001404
84 #define FMC_PFB01CR 0x4001f004
85 #define FTFX_FSTAT 0x40020000
86 #define FTFX_FCNFG 0x40020001
87 #define FTFX_FCCOB3 0x40020004
88 #define FTFX_FPROT3 0x40020010
89 #define FTFX_FDPROT 0x40020017
90 #define SIM_BASE 0x40047000
91 #define SIM_BASE_KL28 0x40074000
92 #define SIM_COPC 0x40048100
94 #define WDOG_BASE 0x40052000
95 #define WDOG32_KE1X 0x40052000
96 #define WDOG32_KL28 0x40076000
97 #define SMC_PMCTRL 0x4007E001
98 #define SMC_PMSTAT 0x4007E003
99 #define SMC32_PMCTRL 0x4007E00C
100 #define SMC32_PMSTAT 0x4007E014
101 #define PMC_REGSC 0x4007D002
102 #define MC_PMCTRL 0x4007E003
103 #define MCM_PLACR 0xF000300C
106 #define SIM_SOPT1_OFFSET 0x0000
107 #define SIM_SDID_OFFSET 0x1024
108 #define SIM_FCFG1_OFFSET 0x104c
109 #define SIM_FCFG2_OFFSET 0x1050
111 #define WDOG_STCTRLH_OFFSET 0
112 #define WDOG32_CS_OFFSET 0
115 #define PM_STAT_RUN 0x01
116 #define PM_STAT_VLPR 0x04
117 #define PM_CTRL_RUNM_RUN 0x00
120 #define FTFX_CMD_BLOCKSTAT 0x00
121 #define FTFX_CMD_SECTSTAT 0x01
122 #define FTFX_CMD_LWORDPROG 0x06
123 #define FTFX_CMD_SECTERASE 0x09
124 #define FTFX_CMD_SECTWRITE 0x0b
125 #define FTFX_CMD_MASSERASE 0x44
126 #define FTFX_CMD_PGMPART 0x80
127 #define FTFX_CMD_SETFLEXRAM 0x81
149 #define KINETIS_SOPT1_RAMSIZE_MASK 0x0000F000
150 #define KINETIS_SOPT1_RAMSIZE_K24FN1M 0x0000B000
152 #define KINETIS_SDID_K_SERIES_MASK 0x0000FFFF
154 #define KINETIS_SDID_DIEID_MASK 0x00000F80
156 #define KINETIS_SDID_DIEID_K22FN128 0x00000680
157 #define KINETIS_SDID_DIEID_K22FN256 0x00000A80
158 #define KINETIS_SDID_DIEID_K22FN512 0x00000E80
159 #define KINETIS_SDID_DIEID_K24FN256 0x00000700
161 #define KINETIS_SDID_DIEID_K24FN1M 0x00000300
168 #define KINETIS_K_SDID_TYPE_MASK 0x00000FF0
169 #define KINETIS_K_SDID_K10_M50 0x00000000
170 #define KINETIS_K_SDID_K10_M72 0x00000080
171 #define KINETIS_K_SDID_K10_M100 0x00000100
172 #define KINETIS_K_SDID_K10_M120 0x00000180
173 #define KINETIS_K_SDID_K11 0x00000220
174 #define KINETIS_K_SDID_K12 0x00000200
175 #define KINETIS_K_SDID_K20_M50 0x00000010
176 #define KINETIS_K_SDID_K20_M72 0x00000090
177 #define KINETIS_K_SDID_K20_M100 0x00000110
178 #define KINETIS_K_SDID_K20_M120 0x00000190
179 #define KINETIS_K_SDID_K21_M50 0x00000230
180 #define KINETIS_K_SDID_K21_M120 0x00000330
181 #define KINETIS_K_SDID_K22_M50 0x00000210
182 #define KINETIS_K_SDID_K22_M120 0x00000310
183 #define KINETIS_K_SDID_K30_M72 0x000000A0
184 #define KINETIS_K_SDID_K30_M100 0x00000120
185 #define KINETIS_K_SDID_K40_M72 0x000000B0
186 #define KINETIS_K_SDID_K40_M100 0x00000130
187 #define KINETIS_K_SDID_K50_M72 0x000000E0
188 #define KINETIS_K_SDID_K51_M72 0x000000F0
189 #define KINETIS_K_SDID_K53 0x00000170
190 #define KINETIS_K_SDID_K60_M100 0x00000140
191 #define KINETIS_K_SDID_K60_M150 0x000001C0
192 #define KINETIS_K_SDID_K70_M150 0x000001D0
194 #define KINETIS_K_REVID_MASK 0x0000F000
195 #define KINETIS_K_REVID_SHIFT 12
197 #define KINETIS_SDID_SERIESID_MASK 0x00F00000
198 #define KINETIS_SDID_SERIESID_K 0x00000000
199 #define KINETIS_SDID_SERIESID_KL 0x00100000
200 #define KINETIS_SDID_SERIESID_KE 0x00200000
201 #define KINETIS_SDID_SERIESID_KW 0x00500000
202 #define KINETIS_SDID_SERIESID_KV 0x00600000
204 #define KINETIS_SDID_SUBFAMID_SHIFT 24
205 #define KINETIS_SDID_SUBFAMID_MASK 0x0F000000
206 #define KINETIS_SDID_SUBFAMID_KX0 0x00000000
207 #define KINETIS_SDID_SUBFAMID_KX1 0x01000000
208 #define KINETIS_SDID_SUBFAMID_KX2 0x02000000
209 #define KINETIS_SDID_SUBFAMID_KX3 0x03000000
210 #define KINETIS_SDID_SUBFAMID_KX4 0x04000000
211 #define KINETIS_SDID_SUBFAMID_KX5 0x05000000
212 #define KINETIS_SDID_SUBFAMID_KX6 0x06000000
213 #define KINETIS_SDID_SUBFAMID_KX7 0x07000000
214 #define KINETIS_SDID_SUBFAMID_KX8 0x08000000
216 #define KINETIS_SDID_FAMILYID_SHIFT 28
217 #define KINETIS_SDID_FAMILYID_MASK 0xF0000000
218 #define KINETIS_SDID_FAMILYID_K0X 0x00000000
219 #define KINETIS_SDID_FAMILYID_K1X 0x10000000
220 #define KINETIS_SDID_FAMILYID_K2X 0x20000000
221 #define KINETIS_SDID_FAMILYID_K3X 0x30000000
222 #define KINETIS_SDID_FAMILYID_K4X 0x40000000
223 #define KINETIS_SDID_FAMILYID_K5X 0x50000000
224 #define KINETIS_SDID_FAMILYID_K6X 0x60000000
225 #define KINETIS_SDID_FAMILYID_K7X 0x70000000
226 #define KINETIS_SDID_FAMILYID_K8X 0x80000000
227 #define KINETIS_SDID_FAMILYID_KL8X 0x90000000
230 #define KINETIS_SDID_PROJECTID_MASK KINETIS_SDID_DIEID_MASK
231 #define KINETIS_SDID_PROJECTID_KE1XF 0x00000080
232 #define KINETIS_SDID_PROJECTID_KE1XZ 0x00000100
244 #define KINETIS_SDID_S32K_SERIES_MASK 0xFF000000
245 #define KINETIS_SDID_S32K_SERIES_K11X 0x11000000
246 #define KINETIS_SDID_S32K_SERIES_K14X 0x14000000
248 #define KINETIS_SDID_S32K_DERIVATE_MASK 0x00F00000
249 #define KINETIS_SDID_S32K_DERIVATE_KXX2 0x00200000
250 #define KINETIS_SDID_S32K_DERIVATE_KXX3 0x00300000
251 #define KINETIS_SDID_S32K_DERIVATE_KXX4 0x00400000
252 #define KINETIS_SDID_S32K_DERIVATE_KXX5 0x00500000
253 #define KINETIS_SDID_S32K_DERIVATE_KXX6 0x00600000
254 #define KINETIS_SDID_S32K_DERIVATE_KXX8 0x00800000
276 #define KINETIS_MAX_BANKS 4u
387 #define MDM_REG_STAT 0x00
388 #define MDM_REG_CTRL 0x04
389 #define MDM_REG_ID 0xfc
391 #define MDM_STAT_FMEACK (1<<0)
392 #define MDM_STAT_FREADY (1<<1)
393 #define MDM_STAT_SYSSEC (1<<2)
394 #define MDM_STAT_SYSRES (1<<3)
395 #define MDM_STAT_FMEEN (1<<5)
396 #define MDM_STAT_BACKDOOREN (1<<6)
397 #define MDM_STAT_LPEN (1<<7)
398 #define MDM_STAT_VLPEN (1<<8)
399 #define MDM_STAT_LLSMODEXIT (1<<9)
400 #define MDM_STAT_VLLSXMODEXIT (1<<10)
401 #define MDM_STAT_CORE_HALTED (1<<16)
402 #define MDM_STAT_CORE_SLEEPDEEP (1<<17)
403 #define MDM_STAT_CORESLEEPING (1<<18)
405 #define MDM_CTRL_FMEIP (1<<0)
406 #define MDM_CTRL_DBG_DIS (1<<1)
407 #define MDM_CTRL_DBG_REQ (1<<2)
408 #define MDM_CTRL_SYS_RES_REQ (1<<3)
409 #define MDM_CTRL_CORE_HOLD_RES (1<<4)
410 #define MDM_CTRL_VLLSX_DBG_REQ (1<<5)
411 #define MDM_CTRL_VLLSX_DBG_ACK (1<<6)
412 #define MDM_CTRL_VLLSX_STAT_ACK (1<<7)
414 #define MDM_ACCESS_TIMEOUT 500
442 LOG_DEBUG(
"MDM: failed to queue a write request");
468 LOG_DEBUG(
"MDM: failed to queue a read request");
485 uint32_t
mask, uint32_t value, uint32_t timeout_ms)
489 int64_t ms_timeout =
timeval_ms() + timeout_ms;
520 LOG_ERROR(
"Cannot perform halt with a high-level adapter");
533 LOG_DEBUG(
"MDM: failed to read MDM_REG_STAT");
550 LOG_DEBUG(
"MDM: halt succeeded after %d attempts.", tries);
563 LOG_ERROR(
"MDM: failed to clear MDM_REG_CTRL");
580 LOG_ERROR(
"Cannot perform reset with a high-level adapter");
586 LOG_ERROR(
"MDM: failed to write MDM_REG_CTRL");
592 LOG_ERROR(
"MDM: failed to assert reset");
598 LOG_ERROR(
"MDM: failed to clear MDM_REG_CTRL");
620 LOG_ERROR(
"Cannot perform mass erase with a high-level adapter");
640 if (retval !=
ERROR_OK && !has_srst) {
641 LOG_ERROR(
"MDM: failed to assert reset");
642 goto deassert_reset_and_exit;
659 int cnt_mass_erase_disabled = 0;
662 bool man_reset_requested =
false;
668 if (!man_reset_requested && ms_elapsed > 100) {
669 LOG_INFO(
"MDM: Press RESET button now if possible.");
670 man_reset_requested =
true;
673 if (ms_elapsed > 3000) {
674 LOG_ERROR(
"MDM: waiting for mass erase conditions timed out.");
675 LOG_INFO(
"Mass erase of a secured MCU is not possible without hardware reset.");
676 LOG_INFO(
"Connect SRST, use 'reset_config srst_only' and retry.");
677 goto deassert_reset_and_exit;
687 cnt_mass_erase_disabled++;
688 if (cnt_mass_erase_disabled > 10) {
689 LOG_ERROR(
"MDM: mass erase is disabled");
690 goto deassert_reset_and_exit;
700 }
while (cnt_ready < 32);
709 LOG_ERROR(
"MDM: failed to start mass erase");
710 goto deassert_reset_and_exit;
722 goto deassert_reset_and_exit;
740 LOG_ERROR(
"MDM: failed to clear MDM_REG_CTRL");
746 deassert_reset_and_exit:
772 LOG_WARNING(
"Cannot check flash security status with a high-level adapter");
788 LOG_ERROR(
"MDM: failed to read ID register");
815 LOG_ERROR(
"MDM: failed to read MDM_REG_STAT");
826 int secured_score = 0, flash_not_ready_score = 0;
836 for (
unsigned int i = 0; i < 32; i++) {
843 LOG_DEBUG(
"MDM: dap_run failed when validating secured state");
846 for (
unsigned int i = 0; i < 32; i++) {
850 flash_not_ready_score++;
854 if (flash_not_ready_score <= 8 && secured_score > 24) {
857 LOG_WARNING(
"*********** ATTENTION! ATTENTION! ATTENTION! ATTENTION! **********");
859 LOG_WARNING(
"**** Your Kinetis MCU is in secured state, which means that, ****");
860 LOG_WARNING(
"**** with exception for very basic communication, JTAG/SWD ****");
861 LOG_WARNING(
"**** interface will NOT work. In order to restore its ****");
862 LOG_WARNING(
"**** functionality please issue 'kinetis mdm mass_erase' ****");
863 LOG_WARNING(
"**** command, power cycle the MCU and restart OpenOCD. ****");
865 LOG_WARNING(
"*********** ATTENTION! ATTENTION! ATTENTION! ATTENTION! **********");
867 }
else if (flash_not_ready_score > 24) {
869 LOG_WARNING(
"**** Your Kinetis MCU is probably locked-up in RESET/WDOG loop. ****");
870 LOG_WARNING(
"**** Common reason is a blank flash (at least a reset vector). ****");
871 LOG_WARNING(
"**** Issue 'kinetis mdm halt' command or if SRST is connected ****");
872 LOG_WARNING(
"**** and configured, use 'reset halt' ****");
873 LOG_WARNING(
"**** If MCU cannot be halted, it is likely secured and running ****");
874 LOG_WARNING(
"**** in RESET/WDOG loop. Issue 'kinetis mdm mass_erase' ****");
877 LOG_INFO(
"MDM: Chip is unsecured. Continuing.");
910 return (sim_fcfg1 >> shift) & 0x0f;
915 for (
int i = 0; i < argc; i++) {
916 if (strcmp(argv[i],
"-sim-base") == 0) {
919 }
else if (strcmp(argv[i],
"-s32k") == 0) {
922 LOG_ERROR(
"Unsupported flash bank option %s", argv[i]);
989 unsigned int num_blocks;
992 char base_name[69],
name[87], num[11];
1003 strncpy(base_name,
bank->name,
sizeof(base_name) - 1);
1004 base_name[
sizeof(base_name) - 1] =
'\0';
1005 p = strstr(base_name,
".pflash");
1010 snprintf(
name,
sizeof(
name),
"%s.pflash0", base_name);
1017 base_name[
sizeof(base_name) - 1] =
'\0';
1018 p = strstr(base_name,
".cpu");
1023 for (
unsigned int bank_idx = 1; bank_idx < num_blocks; bank_idx++) {
1024 k_bank = &(k_chip->
banks[bank_idx]);
1032 if (bank_idx < k_chip->num_pflash_blocks) {
1035 snprintf(num,
sizeof(num),
"%u", bank_idx);
1039 snprintf(num,
sizeof(num),
"%u",
1049 bank->default_padded_value =
bank->erased_value = 0xff;
1052 snprintf(
name,
sizeof(
name),
"%s.%s%s",
1053 base_name,
class, num);
1096 wdog_algorithm->
address + code_size - 2,
1102 LOG_ERROR(
"Error executing Kinetis WDOG unlock algorithm");
1119 static const uint8_t kinetis_unlock_wdog_code[] = {
1120 #include "../../../contrib/loaders/watchdog/armv7m_kinetis_wdog.inc"
1127 if ((wdog & 0x1) == 0) {
1131 LOG_INFO(
"Disabling Kinetis watchdog (initial WDOG_STCTRLH = 0x%04" PRIx16
")", wdog);
1141 LOG_INFO(
"WDOG_STCTRLH = 0x%04" PRIx16, wdog);
1150 static const uint8_t kinetis_unlock_wdog_code[] = {
1151 #include "../../../contrib/loaders/watchdog/armv7m_kinetis_wdog32.inc"
1158 if ((wdog_cs & 0x80) == 0)
1161 LOG_INFO(
"Disabling Kinetis watchdog (initial WDOG_CS 0x%08" PRIx32
")", wdog_cs);
1171 if ((wdog_cs & 0x80) == 0)
1174 LOG_ERROR(
"Cannot disable Kinetis watchdog (WDOG_CS 0x%08" PRIx32
"), issue 'reset init'", wdog_cs);
1197 case KINETIS_WDOG_K:
1200 case KINETIS_WDOG_COP:
1205 if ((sim_copc & 0xc) == 0)
1208 LOG_INFO(
"Disabling Kinetis watchdog (initial SIM_COPC 0x%02" PRIx8
")", sim_copc);
1217 if ((sim_copc & 0xc) == 0)
1220 LOG_ERROR(
"Cannot disable Kinetis watchdog (SIM_COPC 0x%02" PRIx8
"), issue 'reset init'", sim_copc);
1223 case KINETIS_WDOG32_KE1X:
1226 case KINETIS_WDOG32_KL28:
1252 LOG_ERROR(
"Flash operation failed, illegal command");
1255 }
else if (fstat & 0x10)
1256 LOG_ERROR(
"Flash operation failed, protection violated");
1258 else if (fstat & 0x40)
1259 LOG_ERROR(
"Flash operation failed, read collision");
1261 else if (fstat & 0x80)
1283 for (
unsigned int i = 0; i < 50; i++) {
1292 if ((fstat & 0x80) == 0) {
1296 if (fstat != 0x80) {
1305 #include "../../../contrib/loaders/flash/kinetis/kinetis_flash.inc"
1310 uint32_t
offset, uint32_t wcount)
1318 uint32_t end_address;
1327 LOG_WARNING(
"no working area available, can't do block memory writes");
1339 LOG_WARNING(
"large enough working area not available, can't do block memory writes");
1347 LOG_ERROR(
"allocating working area failed");
1374 end_address =
buf_get_u32(reg_params[0].value, 0, 32);
1376 LOG_ERROR(
"Error writing flash at %08" PRIx32, end_address);
1386 LOG_ERROR(
"Error executing kinetis Flash programming algorithm");
1404 LOG_ERROR(
"Protection setting is possible with 'kinetis fcf_source protection' only!");
1408 if (!
bank->prot_blocks ||
bank->num_prot_blocks == 0) {
1409 LOG_ERROR(
"No protection possible for current bank!");
1413 for (
unsigned int i = first; i <
bank->num_prot_blocks && i <= last; i++)
1414 bank->prot_blocks[i].is_protected = set;
1416 LOG_INFO(
"Protection bits will be written at the next FCF sector erase or write.");
1417 LOG_INFO(
"Do not issue 'flash info' command until protection is written,");
1418 LOG_INFO(
"doing so would re-read protection status from MCU.");
1450 LOG_ERROR(
"Protection checks for FlexRAM not supported");
1455 for (
unsigned int i = 0; i <
bank->num_prot_blocks; i++) {
1456 if ((fprot >> b) & 1)
1457 bank->prot_blocks[i].is_protected = 0;
1459 bank->prot_blocks[i].is_protected = 1;
1470 uint32_t fprot = 0xffffffff;
1471 uint8_t fsec = 0xfe;
1472 uint8_t fdprot = 0xff;
1473 unsigned int num_blocks;
1474 uint32_t pflash_bit;
1488 for (
unsigned int bank_idx = 0; bank_idx < num_blocks; bank_idx++) {
1489 k_bank = &(k_chip->
banks[bank_idx]);
1490 bank_iter = k_bank->
bank;
1493 LOG_WARNING(
"Missing bank %u configuration, FCF protection flags may be incomplete", bank_idx);
1501 LOG_ERROR(
"BUG: PFLASH bank %u has no protection blocks",
1504 LOG_DEBUG(
"skipping FLEX_NVM bank %u with no prot blocks (EE bkp only)",
1511 LOG_ERROR(
"BUG: bank %u has NULL protection blocks array",
1519 fprot &= ~pflash_bit;
1527 fdprot &= ~dflash_bit;
1543 uint8_t fccob4, uint8_t fccob5, uint8_t fccob6, uint8_t fccob7,
1544 uint8_t fccob8, uint8_t fccob9, uint8_t fccoba, uint8_t fccobb,
1545 uint8_t *ftfx_fstat)
1547 uint8_t
command[12] = {faddr & 0xff, (faddr >> 8) & 0xff, (faddr >> 16) & 0xff, fcmd,
1548 fccob7, fccob6, fccob5, fccob4,
1549 fccobb, fccoba, fccob9, fccob8};
1576 *ftfx_fstat = fstat;
1578 if ((fstat & 0xf0) != 0x80) {
1579 LOG_DEBUG(
"ftfx command failed FSTAT: %02X FCCOB: %02X%02X%02X%02X %02X%02X%02X%02X %02X%02X%02X%02X",
1604 *pmstat = stat32 & 0xff;
1647 LOG_INFO(
"Switching from VLPR to RUN mode.");
1665 for (
unsigned int i = 100; i > 0; i--) {
1675 LOG_ERROR(
"Flash operation not possible in current run mode: SMC_PMSTAT: 0x%x", pmstat);
1676 LOG_ERROR(
"Issue a 'reset init' command.");
1686 case KINETIS_CACHE_K:
1692 case KINETIS_CACHE_L:
1697 case KINETIS_CACHE_MSCM:
1702 case KINETIS_CACHE_MSCM2:
1730 if ((first >
bank->num_sectors) || (last >
bank->num_sectors))
1738 for (
unsigned int i = first; i <= last; i++) {
1741 0, 0, 0, 0, 0, 0, 0, 0,
NULL);
1752 LOG_WARNING(
"Flash Configuration Field erased, DO NOT reset or power off the device");
1753 LOG_WARNING(
"until correct FCF is programmed or MCU gets security lock.");
1760 LOG_WARNING(
"Flash Configuration Field write failed");
1782 if (ftfx_fcnfg & (1 << 1))
1787 0, 0, 0, 0, 0, 0, 0, 0,
NULL);
1796 if (ftfx_fcnfg & (1 << 1))
1809 uint8_t *buffer_aligned =
NULL;
1816 uint32_t prog_section_chunk_bytes = k_bank->
sector_size >> 8;
1820 uint32_t
size = prog_size_bytes -
offset % prog_size_bytes;
1821 uint32_t align_begin =
offset % prog_section_chunk_bytes;
1823 uint32_t size_aligned;
1824 uint16_t chunk_count;
1830 align_end = (align_begin +
size) % prog_section_chunk_bytes;
1832 align_end = prog_section_chunk_bytes - align_end;
1834 size_aligned = align_begin +
size + align_end;
1835 chunk_count = size_aligned / prog_section_chunk_bytes;
1837 if (
size != size_aligned) {
1839 if (!buffer_aligned)
1840 buffer_aligned = malloc(prog_size_bytes);
1842 memset(buffer_aligned, 0xff, size_aligned);
1843 memcpy(buffer_aligned + align_begin,
buffer,
size);
1846 4, size_aligned / 4, buffer_aligned);
1850 bank->base +
offset, align_begin, align_end);
1853 4, size_aligned / 4,
buffer);
1860 LOG_ERROR(
"target_write_memory failed");
1867 chunk_count>>8, chunk_count, 0, 0,
1868 0, 0, 0, 0, &ftfx_fstat);
1876 if (ftfx_fstat & 0x01) {
1881 LOG_ERROR(
"Flash write immediately after the end of Flash Config Field shows error");
1882 LOG_ERROR(
"because the flash memory is 256 bits wide (data were written correctly).");
1883 LOG_ERROR(
"Either change the linker script to add a gap of 16 bytes after FCF");
1884 LOG_ERROR(
"or set 'kinetis fcf_source write'");
1895 free(buffer_aligned);
1904 bool fallback =
false;
1911 LOG_INFO(
"This device supports Program Longword execution only.");
1916 LOG_WARNING(
"FlexRAM not ready, fallback to slow longword write.");
1927 uint8_t *new_buffer =
NULL;
1931 LOG_ERROR(
"offset 0x%" PRIx32
" breaks the required alignment",
offset);
1936 uint32_t old_count =
count;
1937 count = (old_count | 3) + 1;
1938 new_buffer = malloc(
count);
1940 LOG_ERROR(
"odd number of bytes to write and no memory "
1941 "for padding buffer");
1944 LOG_INFO(
"odd number of bytes to write (%" PRIu32
"), extending to %" PRIu32
" "
1945 "and padding with 0xff", old_count,
count);
1946 memset(new_buffer + old_count, 0xff,
count - old_count);
1950 uint32_t words_remaining =
count / 4;
1960 LOG_WARNING(
"couldn't use block writes, falling back to single "
1963 while (words_remaining) {
1970 0, 0, 0, 0, &ftfx_fstat);
1978 if (ftfx_fstat & 0x01)
1991 LOG_ERROR(
"Flash write strategy not implemented");
2004 bool set_fcf =
false;
2005 bool fcf_in_data_valid =
false;
2006 bool fcf_differs =
false;
2027 if (offset < bank->sectors[sect].
offset +
bank->sectors[sect].size
2037 if (fcf_in_data_valid) {
2039 if (memcmp(fcf_in_data, fcf_buffer, 8)) {
2041 LOG_INFO(
"Setting of backdoor key is not supported in mode 'kinetis fcf_source protection'.");
2045 LOG_INFO(
"Flash protection requested in the programmed file differs from current setting.");
2049 LOG_INFO(
"Data flash protection requested in the programmed file differs from current setting.");
2051 if ((fcf_in_data[
FCF_FSEC] & 3) != 2) {
2052 fcf_in_data_valid =
false;
2053 LOG_INFO(
"Device security requested in the programmed file! Write denied.");
2056 LOG_INFO(
"Strange unsecure mode 0x%02" PRIx8
2057 " requested in the programmed file, set FSEC = 0x%02" PRIx8
2058 " in the startup code!",
2063 LOG_INFO(
"FOPT requested in the programmed file differs from current setting, set 'kinetis fopt 0x%02"
2064 PRIx8
"'.", fcf_in_data[
FCF_FOPT]);
2070 fcf_in_data_valid =
false;
2071 LOG_INFO(
"Cannot re-program FCF. Expect verify errors at FCF (0x400-0x40f).");
2073 LOG_INFO(
"Trying to re-program FCF.");
2075 LOG_INFO(
"Flash re-programming may fail on this device!");
2081 if (set_fcf && !fcf_in_data_valid) {
2100 LOG_WARNING(
"Flash Configuration Field written.");
2101 LOG_WARNING(
"Reset or power off the device to make settings effective.");
2120 uint8_t fcfg1_eesize, fcfg1_depart;
2121 uint32_t ee_size = 0;
2122 uint32_t pflash_size_k, nvm_size_k, dflash_size_k;
2123 unsigned int generation = 0, subseries = 0, derivate = 0;
2131 k_chip->
flash_support = FS_PROGRAM_PHRASE | FS_PROGRAM_SECTOR;
2142 generation = (k_chip->
sim_sdid) >> 28 & 0x0f;
2143 subseries = (k_chip->
sim_sdid) >> 24 & 0x0f;
2144 derivate = (k_chip->
sim_sdid) >> 20 & 0x0f;
2229 LOG_ERROR(
"Unsupported S32K1xx-series");
2242 fcfg1_depart = (k_chip->
sim_fcfg1 >> 12) & 0x0f;
2243 fcfg1_eesize = (k_chip->
sim_fcfg1 >> 16) & 0x0f;
2244 if (fcfg1_eesize <= 9)
2245 ee_size = (16 << (10 - fcfg1_eesize));
2246 if (fcfg1_depart == 0xf) {
2250 if (generation == 1 && subseries == 4 && derivate == 8) {
2251 LOG_WARNING(
"DEPART 0b1111 on S32K148: assuming 512 KiB DFlash. This is only valid if a PGMPART"
2252 " has been previously launched. Use DEPART 0b0000 to avoid this warning.");
2257 }
else if ((fcfg1_depart & 0x8) == 0) {
2265 if (fcfg1_depart & 0x7)
2266 k_chip->
dflash_size = 4096 << (fcfg1_depart & 0x7);
2271 snprintf(k_chip->
name,
sizeof(k_chip->
name),
"S32K%u%u%u",
2272 generation, subseries, derivate);
2280 nvm_size_k = k_chip->
nvm_size / 1024;
2283 LOG_INFO(
"%u FlexNVM banks: %" PRIu32
" KiB total, %" PRIu32
" KiB available as data flash, %"
2284 PRIu32
" bytes FlexRAM",
2300 uint8_t fcfg1_nvmsize, fcfg1_pfsize, fcfg1_eesize, fcfg1_depart;
2301 uint8_t fcfg2_pflsh;
2302 uint32_t ee_size = 0;
2303 uint32_t pflash_size_k, nvm_size_k, dflash_size_k;
2304 uint32_t pflash_size_m;
2305 unsigned int num_blocks = 0;
2306 unsigned int maxaddr_shift = 13;
2309 unsigned int familyid = 0, subfamid = 0;
2310 unsigned int cpu_mhz = 120;
2311 bool use_nvm_marking =
false;
2312 char flash_marking[12], nvm_marking[2];
2351 k_chip->
flash_support = FS_PROGRAM_LONGWORD | FS_PROGRAM_SECTOR;
2364 k_chip->
flash_support = FS_PROGRAM_LONGWORD | FS_PROGRAM_SECTOR;
2380 k_chip->
flash_support = FS_PROGRAM_LONGWORD | FS_PROGRAM_SECTOR;
2389 k_chip->
flash_support = FS_PROGRAM_PHRASE | FS_PROGRAM_SECTOR;
2399 k_chip->
flash_support = FS_PROGRAM_PHRASE | FS_PROGRAM_SECTOR;
2402 LOG_ERROR(
"Unsupported K-family FAMID");
2408 use_nvm_marking =
true;
2425 strcat(
name,
" Rev 1.x");
2438 use_nvm_marking =
true;
2463 k_chip->
flash_support = FS_PROGRAM_PHRASE | FS_PROGRAM_SECTOR;
2477 LOG_ERROR(
"Unsupported Kinetis K22 DIEID");
2490 k_chip->
flash_support = FS_PROGRAM_PHRASE | FS_PROGRAM_SECTOR;
2506 k_chip->
flash_support = FS_PROGRAM_PHRASE | FS_PROGRAM_SECTOR;
2517 k_chip->
flash_support = FS_PROGRAM_PHRASE | FS_PROGRAM_SECTOR | FS_ECC;
2528 k_chip->
flash_support = FS_PROGRAM_PHRASE | FS_PROGRAM_SECTOR | FS_ECC;
2538 k_chip->
flash_support = FS_PROGRAM_LONGWORD | FS_NO_CMD_BLOCKSTAT;
2547 k_chip->
flash_support = FS_PROGRAM_LONGWORD | FS_NO_CMD_BLOCKSTAT;
2550 use_nvm_marking =
false;
2551 snprintf(
name,
sizeof(
name),
"MKL8%uZ%%s7",
2556 LOG_ERROR(
"Unsupported Kinetis FAMILYID SUBFAMID");
2559 if (
name[0] ==
'\0')
2560 snprintf(
name,
sizeof(
name),
"MK%u%uF%%s%u",
2561 familyid, subfamid, cpu_mhz / 10);
2589 snprintf(
name,
sizeof(
name),
"MKL%u%uZ%%s%u",
2590 familyid, subfamid, cpu_mhz / 10);
2626 LOG_ERROR(
"Unsupported KW FAMILYID SUBFAMID");
2628 snprintf(
name,
sizeof(
name),
"MKW%u%uZ%%s%u",
2629 familyid, subfamid, cpu_mhz / 10);
2642 strcpy(
name,
"MKV10Z%s7");
2651 strcpy(
name,
"MKV11Z%s7");
2682 k_chip->
flash_support = FS_PROGRAM_PHRASE | FS_PROGRAM_SECTOR | FS_WIDTH_256BIT | FS_ECC;
2689 LOG_ERROR(
"Unsupported KV FAMILYID SUBFAMID");
2692 if (
name[0] ==
'\0')
2693 snprintf(
name,
sizeof(
name),
"MKV%u%uF%%s%u",
2694 familyid, subfamid, cpu_mhz / 10);
2709 k_chip->
flash_support = FS_PROGRAM_PHRASE | FS_PROGRAM_SECTOR;
2713 snprintf(
name,
sizeof(
name),
"MKE%u%uZ%%s%u",
2714 familyid, subfamid, cpu_mhz / 10);
2725 k_chip->
flash_support = FS_PROGRAM_PHRASE | FS_PROGRAM_SECTOR;
2729 snprintf(
name,
sizeof(
name),
"MKE%u%uF%%s%u",
2730 familyid, subfamid, cpu_mhz / 10);
2734 LOG_ERROR(
"Unsupported KE FAMILYID SUBFAMID");
2756 LOG_DEBUG(
"SDID: 0x%08" PRIX32
" FCFG1: 0x%08" PRIX32
" FCFG2: 0x%08" PRIX32, k_chip->
sim_sdid,
2759 fcfg1_nvmsize = (uint8_t)((k_chip->
sim_fcfg1 >> 28) & 0x0f);
2760 fcfg1_pfsize = (uint8_t)((k_chip->
sim_fcfg1 >> 24) & 0x0f);
2761 fcfg1_eesize = (uint8_t)((k_chip->
sim_fcfg1 >> 16) & 0x0f);
2762 fcfg1_depart = (uint8_t)((k_chip->
sim_fcfg1 >> 8) & 0x0f);
2764 fcfg2_pflsh = (uint8_t)((k_chip->
sim_fcfg2 >> 23) & 0x01);
2768 if (num_blocks == 0)
2774 LOG_WARNING(
"MAXADDR1 is zero, number of flash banks adjusted to 1");
2777 LOG_WARNING(
"MAXADDR1 is non zero, number of flash banks adjusted to 2");
2782 switch (fcfg1_nvmsize) {
2788 k_chip->
nvm_size = 1 << (14 + (fcfg1_nvmsize >> 1));
2802 switch (fcfg1_eesize) {
2813 ee_size = (16 << (10 - fcfg1_eesize));
2820 switch (fcfg1_depart) {
2838 k_chip->
dflash_size = 4096 << (fcfg1_depart & 0x7);
2846 switch (fcfg1_pfsize) {
2857 k_chip->
pflash_size = 1 << (14 + (fcfg1_pfsize >> 1));
2875 LOG_WARNING(
"SIM_FCFG1 PFSIZE = 0xf: please check if pflash is %" PRIu32
" KB", k_chip->
pflash_size>>10);
2896 if (use_nvm_marking) {
2898 nvm_marking[1] =
'\0';
2900 nvm_marking[0] =
'\0';
2903 pflash_size_m = pflash_size_k / 1024;
2905 snprintf(flash_marking,
sizeof(flash_marking),
"%s%" PRIu32
"M0xxx", nvm_marking, pflash_size_m);
2907 snprintf(flash_marking,
sizeof(flash_marking),
"%s%" PRIu32
"xxx", nvm_marking, pflash_size_k);
2909 snprintf(k_chip->
name,
sizeof(k_chip->
name),
name, flash_marking);
2910 LOG_INFO(
"Kinetis %s detected: %u flash blocks", k_chip->
name, num_blocks);
2913 nvm_size_k = k_chip->
nvm_size / 1024;
2915 LOG_INFO(
"%u FlexNVM banks: %" PRIu32
" KiB total, %" PRIu32
" KiB available as data flash, %"
2916 PRIu32
" bytes FlexRAM", k_chip->
num_nvm_blocks, nvm_size_k, dflash_size_k, ee_size);
2930 uint8_t fcfg2_maxaddr0, fcfg2_pflsh, fcfg2_maxaddr1;
2931 unsigned int num_blocks, first_nvm_bank;
2970 size_k =
bank->size / 1024;
2971 LOG_DEBUG(
"Kinetis bank %u: %" PRIu32
"k PFlash, FTFx base 0x%08" PRIx32
", sect %" PRIu32,
2976 unsigned int nvm_ord = k_bank->
bank_number - first_nvm_bank;
3004 if (
bank->size > limit) {
3006 LOG_DEBUG(
"FlexNVM bank %u limited to 0x%08" PRIx32
" due to active EEPROM backup",
3010 size_k =
bank->size / 1024;
3011 LOG_DEBUG(
"Kinetis bank %u: %" PRIu32
"k FlexNVM, FTFx base 0x%08" PRIx32
", sect %" PRIu32,
3015 LOG_ERROR(
"Cannot determine parameters for bank %u, only %u banks on device",
3022 fcfg2_pflsh = (uint8_t)((k_chip->
sim_fcfg2 >> 23) & 0x01);
3023 fcfg2_maxaddr0 = (uint8_t)((k_chip->
sim_fcfg2 >> 24) & 0x7f);
3024 fcfg2_maxaddr1 = (uint8_t)((k_chip->
sim_fcfg2 >> 16) & 0x7f);
3027 LOG_WARNING(
"MAXADDR0 0x%02" PRIx8
" check failed,"
3028 " please report to OpenOCD mailing list", fcfg2_maxaddr0);
3032 LOG_WARNING(
"MAXADDR1 0x%02" PRIx8
" check failed,"
3033 " please report to OpenOCD mailing list", fcfg2_maxaddr1);
3037 LOG_WARNING(
"FlexNVM MAXADDR1 0x%02" PRIx8
" check failed,"
3038 " please report to OpenOCD mailing list", fcfg2_maxaddr1);
3042 free(
bank->sectors);
3045 free(
bank->prot_blocks);
3049 LOG_ERROR(
"Unknown sector size for bank %u",
bank->bank_number);
3055 if (
bank->num_sectors > 0) {
3062 if (!
bank->prot_blocks)
3066 bank->num_prot_blocks = 0;
3078 if (k_bank && k_bank->
probed)
3086 const char *bank_class_names[] = {
3087 "(ANY)",
"PFlash",
"FlexNVM",
"FlexRAM"
3092 uint32_t size_k =
bank->size / 1024;
3120 bool block_dirty =
true;
3124 if (use_block_cmd && k_bank->
flash_class == FC_FLEX_NVM) {
3127 if (fcfg1_depart != 0xf && fcfg1_depart != 0)
3128 use_block_cmd =
false;
3131 if (use_block_cmd) {
3134 0, 0, 0, 0, 0, 0, 0, 0, &ftfx_fstat);
3138 else if ((ftfx_fstat & 0x01) == 0)
3139 block_dirty =
false;
3144 for (
unsigned int i = 0; i <
bank->num_sectors; i++) {
3148 1, 0, 0, 0, 0, 0, 0, 0, &ftfx_fstat);
3151 bank->sectors[i].is_erased = !(ftfx_fstat & 0x01);
3153 LOG_DEBUG(
"Ignoring error on PFlash sector blank-check");
3155 bank->sectors[i].is_erased = -1;
3160 for (
unsigned int i = 0; i <
bank->num_sectors; i++)
3161 bank->sectors[i].is_erased = 1;
3164 LOG_WARNING(
"kinetis_blank_check not supported yet for FlexRAM");
3175 unsigned int bank_idx;
3176 unsigned int num_blocks, first_nvm_bank;
3177 unsigned long par, log2 = 0, ee1 = 0, ee2 = 0;
3178 enum { SHOW_INFO, DF_SIZE, EEBKP_SIZE } sz_type = SHOW_INFO;
3180 uint8_t load_flex_ram = 1;
3181 uint8_t ee_size_code = 0x3f;
3182 uint8_t flex_nvm_partition_code = 0;
3183 uint8_t ee_split = 3;
3195 if (strcmp(
CMD_ARGV[0],
"dataflash") == 0)
3197 else if (strcmp(
CMD_ARGV[0],
"eebkp") == 0)
3198 sz_type = EEBKP_SIZE;
3201 while (par >> (log2 + 3))
3211 switch (flex_nvm_partition_code) {
3232 command_print(
CMD,
"data flash %d KB", 4 << (flex_nvm_partition_code & 7));
3238 command_print(
CMD,
"Unsupported EEPROM backup size code 0x%02" PRIx8, flex_nvm_partition_code);
3243 flex_nvm_partition_code = 0x8 | log2;
3247 flex_nvm_partition_code = log2;
3254 ee1 = ee2 = eex / 2;
3260 enable = ee1 + ee2 > 0;
3262 for (log2 = 2; ; log2++) {
3263 if (ee1 + ee2 == (16u << 10) >> log2)
3265 if (ee1 + ee2 > (16u << 10) >> log2 || log2 >= 9) {
3272 LOG_ERROR(
"S32K1xx EEPROM cannot be split into two blocks");
3278 else if (ee1 * 7 == ee2)
3280 else if (ee1 != ee2) {
3281 LOG_ERROR(
"Unsupported EEPROM sizes ratio");
3285 ee_size_code = log2 | ee_split << 4;
3295 ee_size_code &= 0x0f;
3297 LOG_INFO(
"DEPART 0x%" PRIx8
", EEPROM size code 0x%" PRIx8,
3298 flex_nvm_partition_code, ee_size_code);
3310 ee_size_code, flex_nvm_partition_code, 0, 0,
3319 for (bank_idx = first_nvm_bank; bank_idx < num_blocks; bank_idx++)
3323 command_print(
CMD,
"FlexNVM banks will be re-probed to set new data flash size.");
3333 if (strcmp(
CMD_ARGV[0],
"write") == 0)
3335 else if (strcmp(
CMD_ARGV[0],
"protection") == 0)
3344 LOG_WARNING(
"BEWARE: incorrect flash configuration may permanently lock the device.");
3346 command_print(
CMD,
"Protection info writes to Flash Configuration Field enabled.");
3347 command_print(
CMD,
"Arbitrary FCF writes disabled. Mode safe from unwanted locking of the device.");
3380 .
name =
"check_security",
3382 .help =
"Check status of device security lock",
3384 .handler = kinetis_check_flash_security_status,
3389 .help =
"Issue a halt via the MDM-AP",
3391 .handler = kinetis_mdm_halt,
3394 .name =
"mass_erase",
3396 .help =
"Issue a complete flash erase via the MDM-AP",
3398 .handler = kinetis_mdm_mass_erase,
3403 .help =
"Issue a reset via the MDM-AP",
3405 .handler = kinetis_mdm_reset,
3414 .help =
"MDM-AP command group",
3419 .
name =
"disable_wdog",
3421 .help =
"Disable the watchdog timer",
3423 .handler = kinetis_disable_wdog_handler,
3426 .name =
"nvm_partition",
3428 .help =
"Show/set data flash or EEPROM backup size in kilobytes,"
3429 " set two EEPROM sizes in bytes and FlexRAM loading during reset",
3430 .usage =
"('info'|'dataflash' size|'eebkp' size) [eesize1 eesize2] ['on'|'off']",
3431 .handler = kinetis_nvm_partition,
3434 .name =
"fcf_source",
3436 .help =
"Use protection as a source for Flash Configuration Field or allow writing arbitrary values to the FCF"
3437 " Mode 'protection' is safe from unwanted locking of the device.",
3438 .usage =
"['protection'|'write']",
3439 .handler = kinetis_fcf_source_handler,
3444 .help =
"FCF_FOPT value source in 'kinetis fcf_source protection' mode",
3446 .handler = kinetis_fopt_handler,
3449 .name =
"create_banks",
3451 .help =
"Driver creates additional banks if device with two/four flash blocks is probed",
3452 .handler = kinetis_create_banks_handler,
3462 .help =
"Kinetis flash controller commands",
3474 .flash_bank_command = kinetis_flash_bank_command,
void init_reg_param(struct reg_param *param, const char *reg_name, uint32_t size, enum param_direction direction)
void destroy_reg_param(struct reg_param *param)
struct adiv5_ap * dap_get_ap(struct adiv5_dap *dap, uint64_t ap_num)
int dap_put_ap(struct adiv5_ap *ap)
This defines formats and data structures used to talk to ADIv5 entities.
static int dap_queue_ap_read(struct adiv5_ap *ap, unsigned int reg, uint32_t *data)
Queue an AP register read.
static int dap_queue_ap_write(struct adiv5_ap *ap, unsigned int reg, uint32_t data)
Queue an AP register write.
static int dap_run(struct adiv5_dap *dap)
Perform all queued DAP operations, and clear any errors posted in the CTRL_STAT register when they ar...
#define ARMV7M_COMMON_MAGIC
Support functions to access arbitrary bits in a byte array.
static uint32_t buf_get_u32(const uint8_t *_buffer, unsigned int first, unsigned int num)
Retrieves num bits from _buffer, starting at the first bit, returning the bits in a 32-bit word.
static void buf_set_u32(uint8_t *_buffer, unsigned int first, unsigned int num, uint32_t value)
Sets num bits in _buffer, starting at the first bit, using the bits in value.
void command_print_sameline(struct command_invocation *cmd, const char *format,...)
void command_print(struct command_invocation *cmd, const char *format,...)
#define CMD
Use this macro to access the command being handled, rather than accessing the variable directly.
#define CMD_ARGV
Use this macro to access the arguments for the command being handled, rather than accessing the varia...
#define COMMAND_PARSE_ON_OFF(in, out)
parses an on/off command argument
#define ERROR_COMMAND_SYNTAX_ERROR
#define CMD_ARGC
Use this macro to access the number of arguments for the command being handled, rather than accessing...
#define COMMAND_PARSE_NUMBER(type, in, out)
parses the string in into out as a type, or prints a command error and passes the error code to the c...
#define CMD_CTX
Use this macro to access the context of the command being handled, rather than accessing the variable...
#define COMMAND_REGISTRATION_DONE
Use this as the last entry in an array of command_registration records.
#define ERROR_COMMAND_ARGUMENT_INVALID
static struct cortex_m_common * target_to_cm(struct target *target)
uint64_t buffer
Pointer to data buffer to send over SPI.
uint32_t size
Size of dw_spi_transaction::buffer.
uint32_t buffer_size
Size of dw_spi_program::buffer.
uint32_t address
Starting address. Sector aligned.
#define ERROR_FLASH_OPER_UNSUPPORTED
#define ERROR_FLASH_BANK_INVALID
#define ERROR_FLASH_OPERATION_FAILED
#define ERROR_FLASH_DST_BREAKS_ALIGNMENT
struct flash_sector * alloc_block_array(uint32_t offset, uint32_t size, unsigned int num_blocks)
Allocate and fill an array of sectors or protection blocks.
void flash_bank_add(struct flash_bank *bank)
Adds a new NOR bank to the global list of banks.
int default_flash_read(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, uint32_t count)
Provides default read implementation for flash memory.
struct flash_bank * flash_bank_list(void)
void jtag_poll_set_enabled(bool value)
Assign flag reporting whether JTAG polling is disallowed.
int adapter_deassert_reset(void)
enum reset_types jtag_get_reset_config(void)
int adapter_assert_reset(void)
#define KINETIS_SOPT1_RAMSIZE_K24FN1M
#define KINETIS_K_SDID_K60_M100
#define KINETIS_SDID_DIEID_K22FN256
#define KINETIS_SDID_SERIESID_MASK
static int kinetis_probe_chip_s32k(struct kinetis_chip *k_chip)
static int kinetis_protect_check(struct flash_bank *bank)
#define KINETIS_K_SDID_K22_M50
#define KINETIS_SDID_PROJECTID_KE1XF
#define KINETIS_SDID_FAMILYID_SHIFT
#define FTFX_CMD_SECTERASE
static int kinetis_create_missing_banks(struct kinetis_chip *k_chip)
#define KINETIS_SDID_SUBFAMID_MASK
static int kinetis_info(struct flash_bank *bank, struct command_invocation *cmd)
#define KINETIS_SDID_SERIESID_KL
#define KINETIS_SDID_S32K_SERIES_MASK
static int kinetis_blank_check(struct flash_bank *bank)
#define KINETIS_K_SDID_K21_M120
#define KINETIS_K_SDID_K30_M100
#define KINETIS_K_SDID_K12
#define KINETIS_K_SDID_K40_M72
static int kinetis_write_block(struct flash_bank *bank, const uint8_t *buffer, uint32_t offset, uint32_t wcount)
#define FTFX_CMD_SETFLEXRAM
static int kinetis_probe(struct flash_bank *bank)
#define KINETIS_SDID_FAMILYID_K1X
#define KINETIS_SDID_SUBFAMID_KX6
#define KINETIS_MAX_BANKS
#define MDM_CTRL_CORE_HOLD_RES
static int kinetis_chip_options(struct kinetis_chip *k_chip, int argc, const char *argv[])
#define KINETIS_SDID_S32K_SERIES_K14X
static int kinetis_disable_wdog32(struct target *target, uint32_t wdog_base)
#define KINETIS_SDID_FAMILYID_K3X
#define KINETIS_K_SDID_K60_M150
#define KINETIS_SDID_DIEID_K24FN1M
#define KINETIS_SDID_FAMILYID_MASK
#define KINETIS_K_REVID_MASK
#define KINETIS_K_SDID_K20_M100
static int kinetis_protect(struct flash_bank *bank, int set, unsigned int first, unsigned int last)
#define KINETIS_K_SDID_K22_M120
#define KINETIS_SDID_PROJECTID_MASK
static const uint8_t kinetis_flash_write_code[]
static const struct kinetis_type kinetis_types_old[]
#define KINETIS_SDID_FAMILYID_KL8X
#define KINETIS_SDID_FAMILYID_K5X
COMMAND_HANDLER(kinetis_mdm_halt)
static int kinetis_write(struct flash_bank *bank, const uint8_t *buffer, uint32_t offset, uint32_t count)
static int kinetis_fill_fcf(struct flash_bank *bank, uint8_t *fcf)
#define KINETIS_K_SDID_K40_M100
#define KINETIS_SDID_SERIESID_K
#define KINETIS_SDID_SERIESID_KV
#define KINETIS_SDID_S32K_DERIVATE_KXX8
static const struct command_registration kinetis_exec_command_handlers[]
#define KINETIS_SDID_SUBFAMID_KX2
#define FTFX_CMD_BLOCKSTAT
#define KINETIS_K_SDID_TYPE_MASK
#define KINETIS_K_SDID_K70_M150
static int kinetis_make_ram_ready(struct target *target)
#define KINETIS_SDID_FAMILYID_K4X
#define KINETIS_K_SDID_K53
static int kinetis_probe_chip(struct kinetis_chip *k_chip)
#define KINETIS_SDID_DIEID_MASK
#define KINETIS_K_REVID_SHIFT
#define KINETIS_SDID_PROJECTID_KE1XZ
static int kinetis_disable_wdog_kx(struct target *target)
static int kinetis_ftfx_clear_error(struct target *target)
#define KINETIS_SDID_S32K_DERIVATE_KXX5
#define KINETIS_SDID_SERIESID_KW
static int kinetis_check_run_mode(struct kinetis_chip *k_chip)
#define KINETIS_SDID_K_SERIES_MASK
#define KINETIS_SDID_SUBFAMID_KX8
#define KINETIS_SDID_S32K_DERIVATE_KXX4
#define KINETIS_SDID_S32K_DERIVATE_KXX3
#define KINETIS_K_SDID_K10_M100
#define KINETIS_SDID_SUBFAMID_KX7
static int kinetis_write_inner(struct flash_bank *bank, const uint8_t *buffer, uint32_t offset, uint32_t count)
#define KINETIS_SDID_FAMILYID_K8X
static int kinetis_auto_probe(struct flash_bank *bank)
#define KINETIS_K_SDID_K20_M120
#define KINETIS_SDID_SUBFAMID_SHIFT
#define KINETIS_SDID_SUBFAMID_KX0
static int kinetis_ftfx_command(struct target *target, uint8_t fcmd, uint32_t faddr, uint8_t fccob4, uint8_t fccob5, uint8_t fccob6, uint8_t fccob7, uint8_t fccob8, uint8_t fccob9, uint8_t fccoba, uint8_t fccobb, uint8_t *ftfx_fstat)
#define KINETIS_SDID_SUBFAMID_KX3
#define KINETIS_K_SDID_K10_M120
#define KINETIS_SDID_FAMILYID_K0X
static void kinetis_invalidate_flash_cache(struct kinetis_chip *k_chip)
#define KINETIS_SDID_FAMILYID_K2X
static int kinetis_write_sections(struct flash_bank *bank, const uint8_t *buffer, uint32_t offset, uint32_t count)
static uint8_t kinetis_fcfg1_depart(enum kinetis_chip_type chip_type, uint32_t sim_fcfg1)
const struct flash_driver kinetis_flash
#define KINETIS_K_SDID_K30_M72
static const uint32_t kinetis_known_mdm_ids[]
#define KINETIS_SDID_SUBFAMID_KX5
FLASH_BANK_COMMAND_HANDLER(kinetis_flash_bank_command)
static int kinetis_mdm_read_register(struct adiv5_dap *dap, unsigned int reg, uint32_t *result)
static void kinetis_free_driver_priv(struct flash_bank *bank)
#define KINETIS_SDID_SUBFAMID_KX1
#define KINETIS_K_SDID_K11
#define KINETIS_K_SDID_K20_M72
#define KINETIS_SDID_S32K_SERIES_K11X
static int kinetis_ftfx_prepare(struct target *target)
#define KINETIS_SDID_DIEID_K22FN128
#define KINETIS_K_SDID_K10_M50
#define FTFX_CMD_SECTSTAT
#define KINETIS_SDID_S32K_DERIVATE_MASK
static bool allow_fcf_writes
static struct kinetis_chip * kinetis_get_chip(struct target *target)
static int kinetis_mdm_write_register(struct adiv5_dap *dap, unsigned int reg, uint32_t value)
#define FTFX_CMD_LWORDPROG
#define KINETIS_K_SDID_K10_M72
static int kinetis_disable_wdog(struct kinetis_chip *k_chip)
#define KINETIS_SDID_DIEID_K22FN512
#define KINETIS_SDID_S32K_DERIVATE_KXX2
#define KINETIS_SDID_DIEID_K24FN256
#define KINETIS_SDID_SERIESID_KE
#define MDM_ACCESS_TIMEOUT
static int kinetis_mdm_poll_register(struct adiv5_dap *dap, unsigned int reg, uint32_t mask, uint32_t value, uint32_t timeout_ms)
static int kinetis_erase(struct flash_bank *bank, unsigned int first, unsigned int last)
#define KINETIS_K_SDID_K51_M72
static const struct command_registration kinetis_command_handler[]
static int kinetis_read_pmstat(struct kinetis_chip *k_chip, uint8_t *pmstat)
#define KINETIS_SOPT1_RAMSIZE_MASK
static int kinetis_disable_wdog_algo(struct target *target, size_t code_size, const uint8_t *code, uint32_t wdog_base)
#define KINETIS_SDID_FAMILYID_K6X
static int kinetis_ftfx_decode_error(uint8_t fstat)
#define KINETIS_K_SDID_K50_M72
#define KINETIS_SDID_S32K_DERIVATE_KXX6
#define FTFX_CMD_SECTWRITE
#define KINETIS_K_SDID_K21_M50
static const struct command_registration kinetis_security_command_handlers[]
#define KINETIS_K_SDID_K20_M50
#define MDM_CTRL_SYS_RES_REQ
#define WDOG_STCTRLH_OFFSET
#define KINETIS_SDID_SUBFAMID_KX4
void alive_sleep(uint64_t ms)
#define LOG_WARNING(expr ...)
#define LOG_ERROR(expr ...)
#define LOG_INFO(expr ...)
#define LOG_DEBUG(expr ...)
#define FLASH_WRITE_GAP_SECTOR
This represents an ARM Debug Interface (v5) Access Port (AP).
struct adiv5_dap * dap
DAP this AP belongs to.
This represents an ARM Debug Interface (v5) Debug Access Port (DAP).
const struct dap_ops * ops
struct adiv5_dap * dap
For targets conforming to ARM Debug Interface v5, this handle references the Debug Access Port (DAP) ...
unsigned int common_magic
When run_command is called, a new instance will be created on the stack, filled with the proper value...
struct armv7m_common armv7m
Provides details of a flash bank, available either on-chip or through a major interface.
unsigned int num_prot_blocks
The number of protection blocks in this bank.
const struct flash_driver * driver
Driver for this bank.
void * driver_priv
Private driver storage pointer.
struct flash_sector * prot_blocks
Array of protection blocks, allocated and initialized by the flash driver.
struct flash_bank * next
The next flash bank on this chip.
struct target * target
Target to which this bank belongs.
Provides the implementation-independent structure that defines all of the callbacks required by OpenO...
const char * name
Gives a human-readable name of this flash driver, This field is used to select and initialize the dri...
int is_protected
Indication of protection status: 0 = unprotected/unlocked, 1 = protected/locked, other = unknown.
enum kinetis_chip::@10 watchdog_type
unsigned int nvm_sector_size
struct kinetis_flash_bank banks[KINETIS_MAX_BANKS]
enum kinetis_chip_type chip_type
unsigned int num_nvm_blocks
enum kinetis_chip::@8 flash_support
unsigned int pflash_sector_size
enum kinetis_chip::@9 cache_type
enum kinetis_chip::@11 sysmodectrlr_type
unsigned int max_flash_prog_size
unsigned int num_pflash_blocks
uint32_t fcfg2_maxaddr0_shifted
uint32_t fcfg2_maxaddr1_shifted
enum kinetis_flash_bank::@7 flash_class
struct kinetis_chip * k_chip
uint32_t protection_block
int(* deassert_reset)(struct target *target)
The implementation is responsible for polling the target such that target->state reflects the state c...
int(* assert_reset)(struct target *target)
struct target_type * type
void target_buffer_set_u32(struct target *target, uint8_t *buffer, uint32_t value)
int target_write_buffer(struct target *target, target_addr_t address, uint32_t size, const uint8_t *buffer)
int target_write_u8(struct target *target, target_addr_t address, uint8_t value)
int target_read_u8(struct target *target, target_addr_t address, uint8_t *value)
int target_run_algorithm(struct target *target, int num_mem_params, struct mem_param *mem_params, int num_reg_params, struct reg_param *reg_param, target_addr_t entry_point, target_addr_t exit_point, unsigned int timeout_ms, void *arch_info)
Downloads a target-specific native code algorithm to the target, and executes it.
int target_write_memory(struct target *target, target_addr_t address, uint32_t size, uint32_t count, const uint8_t *buffer)
Write count items of size bytes to the memory of target at the address given.
uint32_t target_get_working_area_avail(struct target *target)
int target_alloc_working_area(struct target *target, uint32_t size, struct working_area **area)
int target_write_u32(struct target *target, target_addr_t address, uint32_t value)
int target_poll(struct target *target)
int target_free_working_area(struct target *target, struct working_area *area)
Free a working area.
int target_read_u16(struct target *target, target_addr_t address, uint16_t *value)
int target_run_flash_async_algorithm(struct target *target, const uint8_t *buffer, uint32_t count, int block_size, int num_mem_params, struct mem_param *mem_params, int num_reg_params, struct reg_param *reg_params, uint32_t buffer_start, uint32_t buffer_size, uint32_t entry_point, uint32_t exit_point, void *arch_info)
Streams data to a circular buffer on target intended for consumption by code running asynchronously o...
int target_read_u32(struct target *target, target_addr_t address, uint32_t *value)
int target_read_memory(struct target *target, target_addr_t address, uint32_t size, uint32_t count, uint8_t *buffer)
Read count items of size bytes from the memory of target at the address given.
struct target * get_current_target(struct command_context *cmd_ctx)
#define ERROR_TARGET_NOT_HALTED
static const char * target_name(const struct target *target)
Returns the instance-specific name of the specified target.
#define ERROR_TARGET_RESOURCE_NOT_AVAILABLE
#define ARRAY_SIZE(x)
Compute the number of elements of a variable length array.